What is the electric heating cable control system

The electric heating tape control system consists of electric heating tape, power junction box, two (three) way junction box, tail junction box, thermostat, distribution box and other structures. During operation, the power can increase with the increase of current, so that the temperature of the heating tape can reach the ideal temperature point during operation without being affected by the outside world.

Characteristics and applications of the control system:

1. The heating belt intelligent control system is a control method that integrates many control methods, such as PLC programming control, intelligent frequency conversion control, etc. It is widely used in high-power loads, large load fluctuations, and high temperature control precision occasions.

2. PID control is often used in situations where control accuracy is very high.

3. The thyristor control system is equipped with "manual" and "automatic" control functions to adjust the output voltage and realize temperature control of the resistive load of the heating element, which is used in controllable rectifier electronic equipment.

The electric heating cable is wound or laid directly behind the pipeline, and the accessories are installed to form the entire heating system. After the electric heating cable is installed, it is powered on, and the electric heating cable heats the pipeline medium, compensates for the heat loss of the pipeline, and maintains the temperature requirements of the air conditioning water pipeline.