TXLP dual hair heating line

<p>There is no need to lay a cement layer, and it can be directly buried under the 8-10mm adhesive of the ground decoration material. Flexible laying, easy installation, easy standardization and operation, suitable for various floor decoration materials. Whether it is a concrete floor, wooden floor, old tile floor or terrazzo floor, it can be installed on the tile glue with little effect on the ground level.</p>

TXLP/1 220V single-guide heating cable is mainly used in floor heating, soil heating, snow melting, etc.

<p>Cover material: (316L) stainless steel, (CU) copper, (AL) 825 alloy, (CN) copper-nickel alloy</p>

<p>Parallel constant wattage heating cables can be used for pipe and equipment freeze protection and process temperature maintenance where high power output or high temperature exposure is required. This type offers an economical alternative to self-regulating heating cables, but requires more installation skill and a more advanced control and monitoring system.Constant wattage heating cables can provide process temperature maintenance up to 150&deg;C and can Withstands exposure temperatures up to 205&deg;C when powered on.</p>

<p>High temperature shielded type, the output power per meter is 50W at 10&deg;C, and the working voltage is 220V.</p>

<p>Medium temperature shielded type, the output power per meter is 40W at 10&deg;C, and the working voltage is 220V.</p>

<p>HGC series connecting constant power heating cables use core conductor as heating element.</p>

<p>Silicone sheet electric heating belt is a thin strip heating product (standard thickness is 1.5mm). It has good flexibility and can be wrapped around a pipe or other heating body with heat-resistant tape to fix it like a rope, or it can be directly wrapped in a heated The outside of the body is fixed with a spring hook, and the heating performance is better if an insulation layer is added. The heating element is made of nickel-chromium wire wrapped with heat-conducting and insulating silicone material, which is molded at high temperature, so the safety performance is very reliable. Pay attention to avoid overlapping winding installation as much as possible, so as not to affect heat transfer and affect the service life of the product.</p>